CHAIN GUARD® FGG 2 H1
(Synthetic Food Grade Grease)

Chain Guard® FGG 2 H1 is a 100% fully synthetic formulated Poly-alpha-olefin (PAO) based grease that is designed to be used in a wide range of industrial applications where NSF H1 regulations are enforced. Its “incidental food contact” designation allows this multi-purpose premium grease to be used as a protecting agent on all types of food processing equipment. FGG 2 H1 provides the consumer with excellent anticorrosion and water washout properties while maintaining high load carrying capacities, wide operating temperature ranges, and long lubricating life. Furthermore, under wet and humid conditions, Chain Guard® FGG 2 H1 is able to outperform all other greases offered on the lubricant market. This grease is designed to be used on enclosed gears, slide ways, medium to low speed bearings, antifriction bears, as well as all types of food processing machinery.

Chain Guard Food Grade Grease

Characteristics:

  • NSF H1 registered and meets all the requirements of FDA regulations 21 CFR 178.3570
  • Excellent mechanical, thermal and oxidative stability
  • Wide operating temperature range
  • Serviceable at -40°C (-40°F)
  • Continuously useful to 149oC (300oF) and intermittently useful to 204°C (400°F)
  • Meets and exceeds NLGI GC/LB bearing rating
  • Acceptable for use in Canada

Applications:

  • All Food Processing Equipment
  • High humidity areas (Proofers)
  • Industrial Food Machinery
  • Low to medium speed industrial bearings
  • Antifriction Bearings
  • Slide ways
  • Enclosed Gears
Properties Test Method Specifications
NLGI Grade - 2
Specific Gravity ASTM D1298 0.89
Penetration Worked ASTM D217 265 - 295
Penetration After 10,000 Strokes   310-325
Dropping Point ASTM D2265 299°C (570°F)
Water Wash Out - 2.5 % Loss
Thickener - Complex Calcium Sulfonate
Base Oil - PAO
Base Oil Viscosity - 46 cSt
Rust Protection ASTM D1743 Pass
Four Ball EP
Weld Load
Load Wear Index
ASTM D2596
ASTM D2783
500 kg
62
Timken OK Load ASTM D2509 27 kg
Four Ball Wear, 40 Kg., 1200rpm,
75°C, 1 hr., Scar Diameter
ASTM D2266 0.40 mm
Oxidation Resistance
Bearing Life
RPVOT, psi after 1000 hrs.
ASTM D3527
ASTM D952
220 hours
6.0 psi
Low Temperature Torque
Start, limit-<5,000
One Hour Running, limit-<700
ASTM D1478 3500 g-cm
600 g-cm